Nokia Lumia 610 Unlocked by ATF JTAG

Default language ID 0x3409
JTAG Interface Connected, S/N 0xXXXXXXXX
Resetting and Exploring JTAG chain...No Devices found in Chain!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 11/26/2013 10:48:00 AM

==========================================================
 Phone Type  : Lumia 610  RM-835 - Supported
             : Lumia 610  RM-849 - Supported
             : Lumia 610C RM-836 - Supported
 Unlock Type : Read PIN and PUK Unlock Codes
 Other Notes : Disconnect USB Cable before Reading Codes

==========================================================
1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect RJ-45 JTAG Cable to ATF Box
4. Disconnect USB Cable from the Phone
5. DO NOT click RESET JTAG button
6. Click READ CODES button to Start Reading Unlock Codes
----------------------------------------------------------
Disconnect USB Cable from Phone (If Connected)
Re-Connect USB Cable to Phone...
Connect USB Cable to Phone...OK
USB Connected! Waiting for First Event...OK
Disconnect USB Cable Now...OK
Re-Connect USB Cable to Phone...
Waiting for Device Connection 10 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Retrieving Unlock Codes...OK
===================================
Service Provider Unlock Codes Found
===================================
Level 1 PIN: 88586131 ACTIVE
Level 1 PUK: 30360251 ACTIVE
Level 2 PIN: 42116003
Level 2 PUK: 33872017
Level 3 PIN: 45806876
Level 3 PUK: 77678706
Level 4 PIN: 58417758
Level 4 PUK: 15375900
Level 5 PIN: 84897084
Level 5 PUK: 61070662
===================================
Reading Unlock Codes Done!

============================================================================
 1. Remove JTAG Connection and Assemble Phone
 2. Insert SIM Card from different Provider into the Phone
 3. Power ON the Phone
 4. Enter 8-digit PIN Code or 8-digit PUK Code when Phone Requires it
 5. After Code is accepted, wait 30 seconds until Operator Signal Appears

        Write Down 8-digit  PIN CODE  on a piece of paper and attach
        it to the phone under the battery. This will allow the owner
        of the phone to unlock this phone again if he will flash the
        phone firmware in the future.
============================================================================